See how to properly add hardener to polyester adhesive so that you get the most accurate color and the best mix ratio of hardener to glue.

What goes into choosing the best adhesive for a stone project and where you can find resources to make the best decisions for glue products.

See how to antique natural stone such as granite and marble using Tenax brushes to produce the best antique finish with proper parameters.

Whether you are dealing with natural or engineered stone, these discolorations are treatable if you know what you can use to remove them.

See how to antique natural stone such as granite and marble using Tenax brushes to produce the best antique finish with proper parameters.

It can be tough choosing the right stone for your surface when there are so many opitons from which to choose. We cover 3 tips to help you.

There is more than one way to enhance the appearance of stone and in this article we discuss a few methods used for enhancing stone surfaces.

Knowing how to seal granite requires a diverse range of subjects and we talk about some the most popular questions in this article.

Find out how to identify a variety of stain types that occur on natural stone surfaces so you can use the proper procedure to remove them.

See how to match edges to granite and marble that has had the surface textured, brushed, or antiqued but has polished edges.

Find out the procedure for removing stains from natural stone surfaces and the dos and don'ts of stain removal.

Some stains must be removed from a natural stone using a poultice and in this article we explain how to do it step-by-step.

See how to properly add hardener to polyester adhesive so that you get the most accurate color and the best mix ratio of hardener to glue.

Whether you are dealing with natural or engineered stone, these discolorations are treatable if you know what you can use to remove them.

Not all rust stains are the same and getting them to come off, or out of natural stone may require specific methods for removing them.

What can be done to match the edges of a stone countertop to is surface when you are dealing with a stone only dyed on the surface?