TeEtch (Etch Remover) 8 OZ

TeEtch is a polishing compound specially formulate to remove etch marks, water marks, water rings, dull spots and even light scratches on marble, travertine, limestone, alabaster, and onyx stone. Not for use on granite.

Simply apply a spoon full of TeEtch over the etch or water mark. Using a rag, rub the TeEtch over the blemish by hand. After 2 or 3 minutes the etch or water mark will be mechanically removed and re-polished back to the original factory finish. TeEtch may also be used with a buffer.

TeEtch is a polishing compound specially formulated to remove etch marks and other discolorations from calcareous stone. Some of the discolorations that might be treated using TeEtch include:

• Etch Marks
• Water marks
• Water Rings
• Dull Spots
• Light Scratches

Some of the specific materials on which you can use this product with good results include:

• Marble
• Limestone
• Travertine
• Alabaster
• Onyx

Directions for Use

Using TeEtch is simple and etching can be cleaned up by foloowing these steps:

1. Apply a spoonful of TeEtch compound to the discoloration you are removing.
2. Using a cloth, rub the TeEtch over the blemish using a circular motion.
3. After 2 to 3 minutes, the etch will be removed from the surface of the stone.
4. TeEtch may also be used with a buffer.