Galapagos Quartzite Care Program

Although natural quartzites such as Galapagos are very tough and scratch resistant, there are some practices that are recommended for these natural stone surfaces. Even before they are installed keeping water out of the pores of quartzite such as Galapagos is beneficial. In this article we will journey through the topic of how to care for and maintain Galapagos quartzite surfaces. As we do, we will mention some additional things to keep in mind during the fabrication process. For a discussion of why sealing quartzite can be challenging checkout out article entitled: Meeting the Challenge of Sealing Quartzite. Now, on to the topic at hand.

Galapagos Quartzite Wet Cutting

Galapagos quartzite undergoes wet cutting during fabrication. This is important to preserve the performance of the tools used during stone fabrication. Yet, quartzite slabs, including Galapagos are porous and even though they are durable and hard, keeping as much liquid from being absorbed by the stone is not only practical, but makes good sense. Reducing the amount of moisture that gets absorbed by a quartzite stone as it gets cut can be done by sealing the stone prior to cutting.

Galapagos Quartzite Care & Maintenance

Whether the stone is in the shop or installed in a home, Galapagos quartzite surfaces benefit from being treated with a quality stone sealer. These products won't make the stone stain-proof by any means, but they do provide a valuable task. Dirt and spills that are common not only in households, but also in work areas are repelled when an effective sealer is used to treat a Galapagos slab. This means that applying a quartzite stone sealer to the stone will boost its resistance to stains that can be delivered into the pores via moisture and oil.

Quartzite Care & Maintenance Recommended for Galapagos

A question that is sometimes found to be on the minds of professionals and consumers alike is, "Is sealing Galapagos quartzite required?" The answer to that question would depend on how much importance the one asking the question puts on getting the very best results. Why? Because not every single quartzite slab that is made into a countertop will be sealed either correctly or often enough. By the same token though, those countertops will not have the highest level of stain resistance either.

The NSI is a trade association representing every aspect of the natural stone industry. Its current membership at the time of this writing exceeds 2,000 members in over 50 countries. It serves as the authoritative source for safety and technical standards and information regarding the use of natural stone. What does it say regarding sealers?

The NSI says in this document that "in many cases it makes sense to seal", which implies the importance of using sealer to improve stone's resistance to water and oil based liquids. Additionally, we recommend that a care and maintenance routine be used by consumers after installation. Doing so gives the owner of the stone the best performance opportunity.

In conclusion, there a number of reasons to be mindful of practicing a regular care and maintenance routine on a Galapagos quartzite surface as a homeowner and those same reasons are why fabricators use effective products for sealing Galapagos as well as other quartzites. Be sure your routine includes treating quartzite with an effective sealer and the results will show it.