Home > Cartridge Glue > Glaxs >

Warm Grey - P Glaxs Cartridge Adhesive
Glaxs Warm Gray - P 844 Porcelain/Ceramic Glue Cartridge Part# 1RGLAXSCWARMGRAY
 

Distributors With Direct Website Links

Tenax has distributors across the USA. Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 704-583-1173 for assistance. Or, you can find this product online at the above distributor websites:

Tenax USA Price: $26.76
 

 

 

Warm Gray - P Adhesive Cartridge Formulatd to Match Sintered Material Colors


 

Glaxs Warm Gray - P is an effective choice of cartridge adhesive for bonding several materials including porcelain, ceramic, and natural stone....




Product Code: 1RGLAXSCWARMGRAY
Qty:

Description Technical & Safety Videos
 

Warm Gray 215 ML 2:1 Cartridge Glue

Glaxs Warm Gray is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain and similar surfaces. Available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.

Glaxs Advantages:

  • VOC free
  • Excellent adhesion
  • Ultra rapid
  • Excellent color stability to sunlight
  • Glossy, shiny and easy to polish
  • Indoor and Outdoor use
  • Pre-dosed for easy dispensing
  • Comes with 2 mixing nozzles

Glaxs Warm Gray Instructions for Use:

  1. All the surfaces to be treated must be cleaned and free of dust and grease.
  2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
  3. Remove the threaded extremity and uncap the cartridge.
  4. Fix the mixer to the cartridge through the threaded nozzle.
  5. Before applying the glue on the surfaces, do spurge around 5 gr in line.
  6. Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
  7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

Shelf Life:

Glaxs Warm Gray in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.

Safety Rules:

Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.


Share your knowledge of this product. Be the first to write a review »