Tenax Concrete Proof 1 liter
Tenax Concrete Proof is a water repellent sealer for use on concrete, cement and terra cotta with high porosity. Will not change the color of the material. Tenax Concrete Proof penetrates deep into the material providing protection against water without altering the natural breathability of the concrete. Protects against algae and mold.
- Non-film forming invisible finish
- Protects against rain water and moisture damage
- Excellent penetration
- UV Stable
- Prevents the accumulation of dirt
- Solvent based
Instructions for use:
Make sure the surface to be treated is dry and clean. The presence of water, dust or dirt may effect the result regarding the uniformity of the surface. Spread the product using a brush, sponge, cloth or spray gun.Use the right quantity that the material can naturally absorb.
It is suggested to repeat this treatment after 10-15 minutes from the first application, wet on wet. The water repellency effect will be achieved after 24 hours. If using on a floor, do not walk on the surface for at least 24 hours. For high porosity concrete, we suggest at least two coats.
IMPORTANT:
- Always test the product on a small hidden area first.
- Close product tightly after use.
Coverage
1 Liter will treat 54 - 162 square feet depending on the porosity of the material.
Shelf Life:
Keep away from heat, humidity and sun. Product will last at least 2 years if kept between 65°F - 77°F.
Safety:
Please read the safety data sheet before using.